Before you get started, please make sure you have the following hardware items.
- Thinklink Mobile Kit
- 3.5mm Male-to-Male Long Audio Cable (comes as part of the Thinklink Mobile Kit)
- 3.5mm Male-to-Male Short Audio Cable (comes as part of the Thinklink Mobile Kit)
- Thinklabs Ear Bud Headphones
- (Optional) Apple Lightning to 3.5mm Jack Adapter (if using a mobile device without a 3.5mm jack)
STEP 2: Insert the other end of the long audio cable plug all the way into the recessed jack on the Thinklabs One.
This step is for users who are connecting Thinklink to an Apple mobile device (iPhone or iPad) without a 3.5mm headphone jack. If your mobile device provides a 3.5mm headphone jack, skip this step and move to the next step.
STEP 6: Connect the short audio cable or Lightning Audio Adapter into the proper input port on your mobile device.
|3.5mm Headphone Jack||Lightning Audio Adapter|
STEP 7: Set the Source switch on the Thinklink adapter to the middle position.
STEP 8: Set the Monitor switch on the Thinklink adapter to the left position.
This step enables you to listen to the stethoscope sounds during recording.
STEP 9: Download the free Thinklabs Wave app from the Apple App Store or the Google Play Store.
The app appears in the store as follows.
STEP 10: Open the Thinklabs Wave app on your mobile device.
STEP 11: Click OK to enable the app to use the microphone.
NOTE: You will need to perform this step only when you open the Wave app for the first time.
The Thinklabs One now is ready to record sounds on your mobile device, as shown below.
STEP 11: Click Record to begin recording.
For more information on recording auscultation sounds using the Thinklabs Wave app, click here.