Watch the Video
NOTE: Click here to view the recommended best practices for the Thinklabs One battery.
To charge the One, carefully plug the cable all the way into the recessed jack and then plug the USB into the wall charger, as shown below.
WARNING! Ensure the cable is inserted all the way into the recessed jack in the Thinklabs One.
As the Thinklabs One is charging, the battery LED will blink as shown in the image to the left. The LED flash rate will change pace as the device charges, according to the following legend:
When the light stops blinking and remains on, the device is fully charged. When you unplug the One, the battery LED will remain off. For more information on Thinklabs One battery levels, see Check Battery Level.